truck - overload prevention

1. DEVICE DISPLAYING AXLES WEIGHT

The Trueload truck onboard weighing device is perfectly positioned in the cab in the car radio slot to give you the best view of its display. You will be able to see in real time the weight of each axle, the total transported and the net weight. You will be able to set alarm thresholds, so when the weights reach them you will be warned

Onboard Weighing Device.

2. FLEXION MEASUREMENT SENSOR FOR MECHANICAL SUSPENSION

This very small sensor is installed on the mechanical suspension by means of a special glue and allows to convert the suspension flexion, due to the applied load, into weight. Its non-invasive application and without moving parts to add or weld to the vehicle is unique in the industry and the patent covering the sensor demonstrates its effectiveness. Millions of these sensors have been installed, demonstrating to customers like you their robustness over time.

Load sensor for leaf spring.

2. PRESSURE MEASUREMENT SENSOR FOR AIRBAG SUSPENSION

This pressure sensor is installed, through a special fitting, on the pipes that carry the air on each group of suspensions measuring the pressure variations due to the load.

3. CANBUS LINK BOX FOR SENSORS CONNECTION

The CANBUS LINK box allows the connection of the sensors and their identification. In this way it is possible to hook different trailers to the truck ensuring that the instrument on board recognizes it to display its number of axles and the weight on them.

Axles Link Box.

4. HEAVY DUTY CONNECTION CABLE BETWEEN TRUCK AND TRAILER

The connection cable between the truck and the trailer is of the extendable spiral type, very robust and with a quick release connector. It ensures a secure connection and at any time for data exchange between the trailer and the on-board weighing instrument without any type of latency, an important factor for the weight in real time

Do you need information
or clarifications? Fill out the form,
we will reply as soon as possible.
How can we help you?
Fill out the form
Vei Group

The data entered and sent through the following form are collected and managed to follow up your contact requests pursuant to art. 13 of EU Reg. 679/2016 (GDPR); To this end they will be processed by our authorized personnel, and will not be transferred to third parties. With specific consent, they may be used to send subsequent commercial information, newsletters and other communications of a commercial or promotional nature. At any time, pursuant to art. from 15 to 22 of the aforementioned legislation, you can have access to your data, request its modification, cancellation or integration, or oppose their use by writing to: info@veigroup.com.

For more information read our Privacy Policy