The Device is perfectly positioned in the cabin to give you the best view of its display and operability in choosing the data you want to enter before starting the load. Its swivel mount allows you to direct the Device as you wish
The strain sensor called LOADLINK3 is installed on the walking beam placed between the rear axles on the right and on the left. This walking beam undergoes the bending due to the load and the LOADLINK3 measures it being integral with it. The degree of protection of the LOADLINK3 ensures operation at the most extreme temperatures and environmental conditions. The characteristics of its cable and its protection have been chosen for the work environment where substances derived from oil or salt will not damage them.
This LED light is installed outside the cabin to alert the loading machine when the maximum capacity is about to be reached. With an intermittent flashing which increases when the set threshold is approaching, it proves to be useful for the load phases where compliance with the capacity of the vehicle represents a decrease in maintenance costs. Up to 3 lights can be installed to compensate for the different loading positions that the machine can take, right, left or back
The data entered and sent through the following form are collected and managed to follow up your contact requests pursuant to art. 13 of EU Reg. 679/2016 (GDPR); To this end they will be processed by our authorized personnel, and will not be transferred to third parties. With specific consent, they may be used to send subsequent commercial information, newsletters and other communications of a commercial or promotional nature. At any time, pursuant to art. from 15 to 22 of the aforementioned legislation, you can have access to your data, request its modification, cancellation or integration, or oppose their use by writing to: email@example.com.